- 0.001 pF - 1000 pF의 값으로 제공
- 고주파에서 탁월한 성능
- 표준에 포함 된 ISO-17025 공인 교정
가격 정보는 IET Labs, Inc에 문의하십시오.
Prices range from US$3,825.00 to US$3,825.00
GenRad 1403 표준 공기 축전기는 0.001 pF ~ 1000 pF의 10 진수 값으로 안정적인 3 단자 표준입니다. 100pF 이하에서 측정 할 경우 3 단자 연결은 커패시터 단자와 접지 사이의 커패시턴스에 의해 도입 된 측정의 불확실성을 제거하여 정확도를 높입니다.
GenRad 1403 고주파 표준 커패시터는 GenRad / IET 1615-A 커패시턴스 브리지와 함께 사용하기에 이상적입니다. 터미널은 브리지의 알려지지 않은 터미널에 직접 연결됩니다.
커패시턴스 변화는 1pF의 경우 2MHz 주파수와 1000pF 표준의 경우 200kHz에서 0.01 %보다 작아서 1kHz 이외의 주파수에서 LCR 미터 및 브리지를 검증하는 데 이상적인 표준으로 만듭니다.
Df와 tan Delta가 본질적으로 0이라는 것을 의미하는 유전 손실은 감지 할 수 없습니다. 직접 커패시턴스 필드에는 고체 유전체가 없습니다. 모두는 차폐 단자를 가지며이 두 단자는 케이스와 절연되어 있습니다.
GenRad 1403 Series High Frequency Standard Capacitor Basic Specifications
Calibration: A certificate of calibration is supplied with each unit giving the measured capacitance at 1 kHz and at a specified temperature. The measured value is the direct capacitance between shielded terminals when the capacitor has at least one lead completely shielded and its case connected to a guard point.
The calibrated capacitance value is obtained by direct measurement using an AH2700A Capacitance Bridge or comparison, to a precision better than ±(0.01% + 0.00001 pF), with standards whose calibrated values are known to an accuracy < 10 ppm, and are periodically calibrated traceable to the SI through a national metrology institute (NIST, NRC, etc).
Stability: Capacitance change is less than 0.05% per year.
Temperature Coefficient of Direct Capacitance: Typically 20 to 40 ppm per degree between 20° and 70°C. The larger coefficients apply to the smaller capacitance values
Terminals: GR874 Coaxial Connectors, which provide complete shielding of the leads Two bnc-f connectors for -BNC versions